EaCo Chem
EaCo Chem
EaCo Chem
EaCo Chem
EaCo Chem
View Product Gallery
EaCo Chem

Cleansol BC

Brushless Oxidation and Soil Remover for Most Surfaces

Cleansol BC is a highly dilutable, all-purpose alkaline cleaner designed to deep clean virtually any surface from vinyl, painted metal to wood to EIFS. It is a brushless application that allows cleaning professionals to maximize their profitability while obtaining an exceptional clean.
Cleansol BC is ideal for removing tough oxidation staining from industrial, governmental, educational, and residential buildings safely and effectively. It can also be used in conjunction with HD Britenol for a two-step house wash that will outperform any other house wash system on the market today.
Important: Do not use or put Cleansol BC on unpainted metal surfaces.
Note: 5 Gallons in Cleansol BC are only available at distributors.

Suitable Substrates:

The following substrates have been tested on and are deemed suitable under standard conditions. Pre-testing should always be completed:
  • Down Spouts
  • EIFS
  • Glass
  • Gutters
  • Masonry Surfaces     
  • Painted Siding
  • Stucco
  • Vinyl Awnings
  • Vinyl Siding
  • Wood
While this list is extensive, there are other substrates that Cleansol BC may be suitable on that are not listed. Every cleaning situation is unique in its own way. Please follow all precaution, pre-testing and application instructions included on the Cleansol BC® Product Data Sheet.
Cleansol BC Product Data Sheet (English)
Cleansol BC Safety Data Sheet (English)
Cleansol BC Ficha Técnica del Producto (Español)
Cleansol BC Ficha de Datos de Seguridad (Español)
Cleansol BC Fiche Technique du Produit (Français)
Cleansol BC Fiche de Données de Sécurité (Français)
Architectural Spec Sheets

Dilutions:

First, dilute Cleansol BC 4 parts water to 1 part Cleansol BC to make ready to use. Then follow the dilution ranges listed below.
• 10 parts water to 1 part Cleansol BC for difficult cleaning
• 20 parts water to 1 part Cleansol BC for light soil
• Undiluted for gutters and down spouts
Note: Dilutions will vary based on the severity of stain and type of surface.

Coverage Rates:

Coverage rates with Cleansol BC will vary from 100-250 sq. ft. per gallon depending on the surface porosity, texture, ambient temperature, craftsmanship, and severity of staining.

Application Instructions:

1. Pre-wet the surface (do not saturate) with water before applying Cleansol BC.
2. For best brushless results, apply Cleansol BC with a pressure washer – upstream or downstream, or with a low pressure applicator.
3. Cleansol BC requires two quick applications, which leads to complete soil release most of the time. Do not rinse between applications.
Caution: Do not use or put Cleansol BC on unpainted metal surfaces.

Rinsing:

For brushless results, rinsing requires pressure washer impact. Proper rinsing techniques determine the final look and quality of the job. A thorough rinse job is always recommended; however, our chemistry never requires flooding the surface. Pressures that mark the surface should be avoided. When in doubt, follow the manufacturers recommended P.S.I. for the substrates.
Do not use a zero-degree nozzle.
Caution: Do not allow the product to dry on a surface.
EaCo Chem

Send us your inquiry and we'll get right back to you!

EaCo Chem, Inc. | 765 Commerce Avenue | New Castle, PA | (724) 656-1055 | [email protected]

Name
To better serve you, please select the EaCo Chem Product you are inquiring about.