• 10 parts water to 1 part Cleansol BC for difficult cleaning
1. Pre-wet the surface (do not saturate) with water before applying Cleansol BC.
Cleansol BC was used to remove the environmental stains that had formed on the Allguard coating manufactured by Dow Corning. The look of the coating was able to be restored. This extended the look of the coating to match its life which predicted was another 3-5 years.
Cleansol BC was used to remove the oxidation from this coated metal roof. This product is an all-purpose product that has many uses. It’s used as a brushless cleaner which enables oxidation removal leaving that enhanced clean look.
Over time, the effects of the environmental staining were obvious. The ACM panels became dull and had lost their luster. Cleansol BC was able to restore the finish without affecting the composite material.
Cleansol BC removed the environmental staining on this EIFS facade.
Cleansol BC was used to remove the black stains from the EIFS.
Cleansol BC is so versatile, it can be used on most substrates. At 50:1, Cleansol BC easily cleaned these fabric awnings, making them look brand new.
Cleansol BC took care of the black stains on the gutters of this home.
In one fell swoop, Cleansol BC took care of the black stains on the gutters, fascia, and soffit on this home.
Cleansol BC cleaned these oil holding tanks located outside Pittsburgh, PA. Two applications, back-to-back, with a 20:1 dilution followed by a rinse, produced these amazing results.
This homeowner in Houston, TX called upon this contractor who knew from experience that Cleansol BC was their best choice to remove the organic staining from the stucco on this home. Another huge win for Cleansol BC and another happy customer because this contractor used a premium grade product.
Many homeowners don’t realize the affect oxidation has on vinyl until it’s cleaned. The best way to achieve this type of clean is with Cleansol BC. Cleansol BC removed the oxidation and restored these shutters.
Cleansol BC removed the years of wear and restored and brightened the siding.
Cleansol BC cleaned this oxidized garage door at a 10:1 dilution, applied twice, then a low-pressure rinse which revealed a shiny like new appearance.
Oxidation removed safely from metal roll up garage doors at a storage facility.
The removal of oxidation from a commercial building with painted metal siding.
The wood siding on this restaurant was as bad of staining as you will see, but this contractor used Cleansol BC at 3:1 with two applications then a rinse. Because of their testing, they followed up with HD Britenol at 2:1 and the results are night and day.
This playset was neglected for 30 years and covered in environmental staining on the wood and plastic slide. This contractor brought in Cleansol BC to transform to the look and clean that the kids can play on for hours.
The wood deck around this pool was in need of a good restoration from all the environmental stains from over the years. Cleansol BC was the best choice to use for this contractor and the before and after comparison is unbeatable.
This wood deck was in need of a good restoration from all the environmental stains from over the years and Cleansol BC was the best choice to restore it to a look this customer can be proud of.
The environment can take a toll on wood, and make it look old and unappealing. Cleansol BC was brought in to remove these environmental stains from this wood and make the deck something the homeowner can be proud to show off.
This contractor from Mantachie, MS knew exactly the best product to use to restore the wooden fence at the Mooreville Lady Troopers Softball field. By wetting down the surface, applying Cleansol BC 4:1 in ten feet areas at a time and letting dwell for about 3-4 minutes and then a final rinse to make this fence look brand new again, and creating an appearance the Lady Troopers can be proud of during their games.
An outdoor environment will take a toll on wooden patio furniture over time. Cleansol BC can rejuvenate the weathered appearance.
