Roll, brush, or spray through caustic compatible equipment. Apply stripper heavily to cut through multiple layers with the first application.
Stripper Cream does not dry out if applied properly. Removal should begin after scrape testing in multiple areas reveals the substrate.
After adequate soak time, remove the paint by scraping or by high-pressure rinse. Pressures that mark or damage the surface should be avoided.
A diluted solution of Stripper Cream (cut 4:1 with water) is recommended to reactivate the initial application.
After a quick rinse, apply the diluted Stripper Cream. Rinse from the top down. The diluted product should be applied after the first pass and allowed to remain on the surface until the wall is finished.
After rinsing and reapplication, do a final detailed rinse if necessary before neutralizing.
When neutralizing, use NMD 80 diluted at 4 parts water to 1 part NMD 80. NMD80 is applied with low-pressure applicator or through the EC Jet.
The EC Jet automatically cuts the product to 4 parts water to 1 part NMD 80. Alkyd enamel can be removed by first applying AcrylicStrip. Allow to dwell for several minutes.
While AcrylicStrip is still wet, apply Stripper Cream directly over the AcrylicStrip. After adequate soak time and a scratch test, remove the paint by scraping or by high-pressure rinse.
Pressures that mark or damage the surface should be avoided.
