Web Analytics Made Easy - Statcounter

View Product Gallery

PLUS

High-Pressure Degreaser

PLUS is a degreaser made to be used with a pressure washer. It will remove heavy grease, shipping cosmoline, fuel stains and ordinary soils without any caustic damage to the paint.

PLUS can be applied with low or high pressure at 10-1 with cold or hot water. Rinsing is best done with cold water. The reason for this is that PLUS has built-in soil encapsulation qualities. This means the grease will not restick on rinsing. This is quite a benefit in closed-in areas like engine compartments or articulates. The cold water enhances this ability and helps dramatically reduce cleaning times.

Advantages

Reduces time and grease restick
Good on paint
High dilution
Ships non-hazardous

PLUS Product Spec Sheet

PLUS Safety Data Sheet

Architectural Spec Sheets

Dilutions:

– 15:1 to 30:1 for degreasing trucks and heavy equipment.
– 20:1 to 50:1 for brushless truck washing.
– 100:1 for cleaning with brush (1 gallon water to 4oz of PLUS)

Note: Dilutions will vary based on the severity of the stain and type of surface.

Rinsing:

If high pressure is not available, rinse with a garden hose. Always rinse while wet.

Application Instructions:

Apply using a pressure washer up or down stream or a low-pressure spray applicator. Craftsmanship determines the appropriate pressures for rinsing. A thorough rinse job is always recommended, however, our chemistry never requires flooding a wall. Pressures that mark or damage the surface should be avoided. When in doubt, follow the manufacturers recommended P.S.I. for the substrate on which you are working.

Send us your inquiry and we'll get right back to you!

EaCo Chem, Inc. | 765 Commerce Avenue | New Castle, PA | (724) 656-1055 | info@eacochem.com