OneRestore®
One Answer To All Your Restoration Questions
OneRestore® provides remarkable versatility, cleaning power, and safety all in one. It is appropriate for single or multiple surface restoration. OneRestore® can remove the deepest stains. OneRestore® can also be used to safely remove deposits on glass and anodized aluminum. OneRestore® is a great choice for cleaning and restoring college campuses, government facilities, hospitals, and office buildings.
Dilutions:
OneRestore® is always used undiluted.
Coverage Rates:
Coverage rates with OneRestore® will vary from 75-250 sq. ft. per gallon depending on the surface porosity, texture, ambient temperature, craftsmanship, and severity of staining.
Application Instructions:
- Pre-wet the surface (do not saturate) with water before applying OneRestore®.
For best results, apply OneRestore® with a low-pressure sprayer (brushing is not necessary). - For most instances, a single application with a 5-to-10-minute dwell time will remove many of the stains.
- For deeper stains or very porous surfaces, a double application with 5 to 10 minutes in between applications will provide the best results.
- Do not rinse between applications.
Rinsing:
Proper rinsing techniques determine the final look and quality of the job. A thorough rinse job is always recommended; however, our chemistry never requires flooding the surface. OneRestore® can be rinsed using cold water. Pressures that mark the surface should be avoided. When in doubt, follow the manufacturers recommended P.S.I. for the substrates.
Do not use a zero-degree nozzle.
Caution: Do not allow the product to dry on a surface.
