LCS

Water-Based Stripper

LCS is a water-based stripper for removing sealers, stains, and paint. Applications for LCS include removing graffiti, deck stains, multiple layers of latexes, acrylic latexes, alkyds, certain enamels, oil-based stains, and other resin coatings. It can be used to remove petroleum-based and food oil stains from concrete dumpster pads at restaurants and from stainless steel delivery tankers.

Advantages

Non-flammable
Citrus odor
At high dilutions, LCS is an all-purpose cleaner that creates a notable shine

LCS Product Spec Sheet

LCS Safety Data Sheet

Architectural Spec Sheets

Dilutions:

Use undiluted (straight) for stripping.
– 4:1 may work if coating is substantial worn
– Undiluted – 10:1 concrete dumpster pads and stainless steel delivery tankers
– 20:1 – 50:1 for roofs, gutters, and siding

Coverage Rates:

Coverage rates will vary from 125 – 250 sq. ft. per gallon depending on the surface porosity, texture and severity of staining.

Application Instructions:

Apply LCS to a dry surface. Allow the product to dwell for fifteen minutes, before doing a scratch test. Scratch at the paint or coating with a sharp object to see if the substrate is visible.

If the substrate is visible where tested, then it is ready to be rinsed with cold water. If the substrate is not visible or if the coating is gummy but not released, re-apply and let dwell for an additional ten minutes before scratch testing.

Apply starting at the top and mist on water from a garden hose before pressure rinsing. Pressures that mark or damage the surface should be avoided.

If you are not going to pressure wash, scrub with a stiff bristle brush before neutralizing. After neutralizing with HD Britenol, there is less risk of harming plants.

Protect plants from rinse waters if not neutralizing. Certain types of woods may darken after rinsing LCS, so apply HD Britenol undiluted.

Let dwell for three to five minutes, then thoroughly rinse to lighten the wood.

Send us your inquiry and we'll get right back to you!

EaCo Chem, Inc. | 765 Commerce Avenue | New Castle, PA | (724) 656-1055 | info@eacochem.com

LCS

Water-Based Stripper

Advantages

Non-flammable

Citrus odor

At high dilutions, LCS is an all-purpose cleaner that creates a notable shine

Dilutions:

Use undiluted (straight) for stripping.
– 4:1 may work if coating is substantial worn
– Undiluted – 10:1 concrete dumpster pads and stainless steel delivery tankers
– 20:1 – 50:1 for roofs, gutters, and siding

Coverage Rates:

Coverage rates will vary from 125 – 250 sq. ft. per gallon depending on the surface porosity, texture and severity of staining.

Application Instructions:

Apply LCS to a dry surface. Allow the product to dwell for fifteen minutes, before doing a scratch test. Scratch at the paint or coating with a sharp object to see if the substrate is visible.

If the substrate is visible where tested, then it is ready to be rinsed with cold water. If the substrate is not visible or if the coating is gummy but not released, re-apply and let dwell for an additional ten minutes before scratch testing.

Apply starting at the top and mist on water from a garden hose before pressure rinsing. Pressures that mark or damage the surface should be avoided.

If you are not going to pressure wash, scrub with a stiff bristle brush before neutralizing. After neutralizing with HD Britenol, there is less risk of harming plants.

Protect plants from rinse waters if not neutralizing. Certain types of woods may darken after rinsing LCS, so apply HD Britenol undiluted.

Let dwell for three to five minutes, then thoroughly rinse to lighten the wood.

Send us your inquiry and we'll get right back to you!

EaCo Chem, Inc. | 765 Commerce Avenue | New Castle, PA | (724) 656-1055 | info@eacochem.com

Company

EaCo Toolboxes

Members Only

Office Address

Menu

LCS

Water-Based Stripper

Advantages

Non-flammable

Citrus odor

At high dilutions, LCS is an all-purpose cleaner that creates a notable shine

Dilutions:

Use undiluted (straight) for stripping.– 4:1 may work if coating is substantial worn– Undiluted – 10:1 concrete dumpster pads and stainless steel delivery tankers– 20:1 – 50:1 for roofs, gutters, and siding

Coverage Rates:

Coverage rates will vary from 125 – 250 sq. ft. per gallon depending on the surface porosity, texture and severity of staining.

Application Instructions:

Apply LCS to a dry surface. Allow the product to dwell for fifteen minutes, before doing a scratch test. Scratch at the paint or coating with a sharp object to see if the substrate is visible.

If the substrate is visible where tested, then it is ready to be rinsed with cold water. If the substrate is not visible or if the coating is gummy but not released, re-apply and let dwell for an additional ten minutes before scratch testing.

Apply starting at the top and mist on water from a garden hose before pressure rinsing. Pressures that mark or damage the surface should be avoided.

If you are not going to pressure wash, scrub with a stiff bristle brush before neutralizing. After neutralizing with HD Britenol, there is less risk of harming plants.

Protect plants from rinse waters if not neutralizing. Certain types of woods may darken after rinsing LCS, so apply HD Britenol undiluted.

Let dwell for three to five minutes, then thoroughly rinse to lighten the wood.

Send us your inquiry and we'll get right back to you!

EaCo Chem, Inc. | 765 Commerce Avenue | New Castle, PA | (724) 656-1055 | info@eacochem.com

Company

EaCo Toolboxes

Members Only

Office Address

Menu

Use undiluted (straight) for stripping.
– 4:1 may work if coating is substantial worn
– Undiluted – 10:1 concrete dumpster pads and stainless steel delivery tankers
– 20:1 – 50:1 for roofs, gutters, and siding