InStrip
Non-Hazardous Interior and Exterior Stripping Agent
InStrip is a paste-type multi-layer, interior and exterior paint stripper that can lift primers, solvent and water-based paints. The product also removes various wood finishes, such as varnish, shellac and stains. Works great on wood, and will not raise the grain.
Advantages
- Non-toxic and non-corrosive
- Low VOC
- Low odor
- Will not fuzz or discolor hard and soft wood
- Suitable for furniture stripping
- Has a wide range of applications
- Paste clings on vertical surfaces
- pH Neutral
- Safer for the applicator
Product Brochure
Check out our Paint Stripping Manual for great tips, techniques, and choosing the proper product for the job, whether you’re removing paint, stain, adhesives, or graffiti.
Portfolio and Solutions
Mount Vernon
In 2010, the slaves quarters at Mount Vernon began to be restored. Included in the restoration was the removal of a failed stain on the cedar shingle roof.
InStrip was able to effectively remove all of the red stain without damaging the cedar shingles. Since InStrip is extremely safe, there was no need to shut down any part of the facility during the process. Tours were still being conducted while the work was being done. The grain of the wood was not raised or fuzzed.
Substrate: Cedar
Challenge: Stain
Product Used: InStrip
Year Built: c. 1734
Architect: Under supervision of Augustine Washington
Mount Vernon
Paint Stripping
InStrip stripped the red paint from this brick house.
Substrate: Clay Brick
Challenge: Strip multiple layers of paint
Paint Stripping
Paint Stripping
Galvanized Metal
It was decided to strip the paint off of the galvanized ceiling in this college gymnasium after the gym floor had just been refinished. InStrip was chosen because it stays where you put it which allowed the stripping of the ceiling to occur without damaging the newly installed gym floor.
Substrate: Galvanized Metal
Challenge: Paint Stripping