EaCo Chem
View Product Gallery
EaCo Chem

HD Degreaser

Extended Dwell Carbon and Grease Remover

HD Degreaser will penetrate layers with a combination of aggressive caustics, buffering and stabilizing compounds that keeps the product from drying out. This allows a fast and long-term attack with minimal degradation of surfaces. The product is also used for soaking through very thick layers of clay, grease, foodstuffs, and hydraulic fluid and oil stains in one application.
Advantages
  • Excellent adhesion and penetrating cleaning ability on vertical and horizontal surfaces
  • Will not damage wires or hoses in engine compartments
HD Degreaser Product Spec Sheet
HD Degreaser Safety Data Sheet
Architectural Spec Sheets

Dilutions:

Use undiluted (straight).
Dilute up to 50:1, if used in a dip tank application

Coverage Rates:

Coverage rates will vary from 100 – 250 sq. ft. per gallon depending on the surface porosity, texture and severity of staining.

Application Instructions:

Apply undiluted (straight) with a brush or low-pressure sprayer. Allow products to soak until soil is softened. Care should be taken when immersing soft metals such as aluminum into a hot solution. Metal should not be left in the soak for too long, under eight hours. When cleaning badly soiled equipment for repainting, it may be best to apply the product with a sprayer. Repeat the application in areas that look dry. Once the product has been absorbed by the soil and another application will allow complete release in one rinse.
If used in a dip tank application, this product may be diluted up to 50:1.

Rinsing:

Pressure washer rinsing is best.
EaCo Chem

Send us your inquiry and we'll get right back to you!

EaCo Chem, Inc. | 765 Commerce Avenue | New Castle, PA | (724) 656-1055 | info@eacochem.com

Please enable JavaScript in your browser to complete this form.
Name
To better serve you, please select the EaCo Chem Product you are inquiring about.