Web Analytics Made Easy - Statcounter

View Product Gallery

CT Wash

Maintain Your Concrete Trucks & Equipment

CT Wash is designed to remove light to medium build-up of excess concrete from concrete mixer trucks and construction equipment. CT Wash is great for maintaining concrete trucks or equipment, and is highly dilutable when regular maintenance is performed. For heavy build-up removal, use two or three applications spaced five minutes apart. This method is used to extended the dwell times depending on the severity of the build-up.

CT Wash Product Spec Sheet

CT Wash Safety Data Sheet

CT Wash Safety Data Sheet (French)

Architectural Spec Sheets

Dilutions:

• Undiluted: 4 parts water to 1 part CT Wash for excessive build-up
• 10-20 parts water to 1 part CT Wash for regular concrete truck maintenance

Rinsing:

For brushless results, rinsing requires pressure washer impact. Proper rinsing techniques determine the final look and quality of the job. A thorough rinse job is always recommended; however, our chemistry never requires flooding the surface. Pressures that mark the surface should be avoided. When in doubt, follow the manufacturers recommended P.S.I. for the substrates.

Do not use a zero-degree nozzle.

Caution: Do not allow the product to dry on a surface.

Application Instructions:

1. Apply CT Wash with a low-pressure sprayer, foamer, pressure washer, or conventional brushing.
2. Allow a five-to-ten minute dwell time, then re-apply CT Wash without rinsing between applications.
3. Allow another five-to-ten minute dwell time.
4. In areas of heavier build-up, three applications spaced five to ten minutes apart may be necessary.
5. Follow proper rinsing procedures

Caution: Do not allow the product to dry on a surface.

Send us your inquiry and we'll get right back to you!

EaCo Chem, Inc. | 765 Commerce Avenue | New Castle, PA | (724) 656-1055 | info@eacochem.com