AP Plus BC
Remove Heavy Grease from Heavy Equipment
AP Plus BC is designed to enable the user to remove most soils from paint without brushing. AP Plus BC can be applied at high dilutions because it is a “through the pressure washer” type degreaser.
This solution works well with hot or cold water. When used in hot water, it will also clean the pressure washer coils as it works. AP Plus BC leaves no film or water spots on glass with a good rinse.
Dilutions:
Apply using a pressure washer up or down stream or a low-pressure spray applicator.
-15:1 to 30:1 for degreasing trucks and heavy equipment
-20:1 to 50:1 for brushless truck washing
-100:1 for cleaning with brush
Note: Dilutions will vary base on he severity of the stain and type of surface.
Optional oil stain removal from concrete:
– Undiluted (straight) applied to the worst areas
– 4:1 for removing shadows
Application Instructions:
Dilute for the situation.
The product can be applied with high or low pressure, between 60 – 3000 P.S.I.. Let the material dwell for five minutes. Do not let dry. Always rinse while wet. High pressure rinsing between 500 – 2000 P.S.I..
