Web Analytics Made Easy - Statcounter

View Product Gallery

A.R.T.

Restore Satin Luster to Anodized Aluminum

A.R.T.’s unique chemistry is a solvent-based resin system designed for treating the surface of anodized aluminum to restore the satin luster that has been damaged over time. A.R.T. (Anodized Restoration Treatment) will stay on the surface for extended periods of time without cracking, lifting or peeling and is easily removed for re-treatment.

A.R.T. has a wipe-on applicability and ships non-hazardous. It is recommended to first clean the surface with OneRestore® and allow the substrate to dry prior to applying A.R.T.

Now available in pints and gallons.

A.R.T. Product Spec Sheet

A.R.T. Safety Data Sheet

Architectural Spec Sheets

Dilutions:

A.R.T. is always used undiluted.

Coverage Rates:

Minimum expected coverage pre gallon is 3,000 – 5,000 linear feet of anodized trim. Application to a flat surface would produce 1,500 – 2,000 sq. ft.

Application Instructions:

1. Once the surface has been properly cleaned and completely dry, apply A.R.T. with a soft, lint-free cloth.
2. Apply enough A.R.T. directly on the cloth to spread over at least one whole window or door segment; ring out the excess liquid.
3. Wipe on a thin coat in one direction – do not go back over A.R.T.
4. When the cloth no longer provides adequate coverage, re-wet with A.R.T.

Note: If A.R.T. gets on adjoining surfaces, wipe free. Product applied too heavily will remain tacky and attract dust and airborne particles. A.R.T. should not be applied over previously applied coatings. If coated, remove it with the appropriate stripper. This system will not restore pitted anodized aluminum. Once pitting has occurred, exposing bare metal, only repainting will fix the surface.

Rinsing:

A.R.T. does not get rinsed off.

Send us your inquiry and we'll get right back to you!

EaCo Chem, Inc. | 765 Commerce Avenue | New Castle, PA | (724) 656-1055 | info@eacochem.com