Properly Remove Oil Stains
![parking-spot_2 (1)](https://eacochem.com/wp-content/uploads/2024/05/parking-spot_2-1.webp)
Hot Stain Remover
Brick Paver
Oil Stains
Hot Stain Remover successfully removed the oil stains from the pavers in this parking lot.
Substrate: Brick Paver
Challenge: Oil Stains
Product Used: Hot Stain Remover
Hot Stain Remover
Oil stains, such as the one pictured here, can prove to be very difficult to remove. There are methods to absorb the physical oil, however, the trouble comes with removing the stain left behind!
- Pre wet (don’t soak) the area with water before applying the product.
- Dilution will vary depending on the severity of the stain from undiluted to 10:1
- Allow Hot Stain Remover to dwell 15 minutes to an hour. Hot Stain Remover should have an extended dwell time as it contains special additives that cause the stain to rise to the surface.
- Thoroughly Rinse.
Contact Our Knowledgeable Team
Contractor Support, Distribution, Training and Product Information
Phone
(724) 656-1055
info@eacochem.com
Location
EaCo Chem, 765 Commerce Avenue New Castle, PA 16101 USA
Request Information
Call us. Email us. Send us a message. Tell us about your project and the issues you’re facing. We’ll guide you to find the EaCo Chem products that can help. Our knowledgeable staff is ready to assist you!