Truck Wash Supreme

Brushless Truck Wash

Description and Use
Truck Wash Supreme is a one step brushless truck wash that is safe on all painted surfaces and polished aluminum. Truck Wash Supreme is extremely quick rinsing and has the ability to be spot brushed (if necessary) on heavy stains without leaving brush marks after rinsing. Truck Wash Supreme will leave a great shine and even at high dilution rates while maintaining its effectiveness. For frequently washed fleets this concentrate can be cut in half. Truck Wash Supreme uses no petroleum solvents to achieve its clean and is completely biodegradable. Truck Wash Supreme is a very versatile truck wash detergent.

Advantages
*Safe on polished aluminum.
*One step brushless system.
*Completely biodegradable.

Limitations
*Not appropriate for most reclaim systems.

Technical Data
Appearance & Odor: Clear liquid, mild odor.
Physical State: Liquid
pH: 9.5
Vapor Pressure (mmHg): N/A
Vapor Density (air= 1) : >1
Boiling Point: 212° F
Freezing/Melting Point: 32° F
Specific Gravity (WATER =1): 1.004
Evaporation Rate: <1
Solubility in Water: Complete

Surface & Air Temperatures
Best cleaning results are obtained when air is above 40° Fahrenheit.

Pre-Testing
Always test prior to beginning full-scale cleaning operations. Testing should confirm cleaning effectiveness.
Best cleaning results are obtained when surface and air temperatures are above 40° Fahrenheit.

Dilutions
-Apply using pressure washer – (up or down stream) or low pressure spray applicator
- 4:1 difficult cleaning and de-oxidizing polished aluminum, for a quick, one application cleaning
- 10:1 to 20:1 routine cleaning of all surfaces
Note: Dilutions will vary based on the severity of the stain and type of surface.

Application Instructions
Truck Wash Supreme is designed for use with a pressure washer with high or low pressure application and using either hot or cold water. The trick to brushless cleaning is that the product must be laid on the surface using two quick applications which for complete soil release. High pressure rinsing is recommended. Water softeners are built into the product so water re-treatment is generally not necessary. There is one other caution to note, if Truck Wash Supreme is used on vehicles that have been washed with certain silicates a white film may result. If this occurs a solution of Sabre diluted 4:1and brushed on is generally effective at remedying this situation.

Safety Information
*Precautionary Measures: Always wear goggles and rubber gloves when handling this product. Keep off of skin and clothing. If material comes in contact with clothing, wash before reuse. Contains Ethanol, Potassium Hydroxide and Tetrasodiumsalt of Ethylenediaminetetracetic Acid. Do not get in eyes, on skin or clothing. Avoid breathing fumes. Keep container closed when not in use. Use with adequate ventilation. Applicators should wear rain suit of plastic,
rubber or PVC, boots and gloves, face shields and goggles to avoid splash to bare skin or eyes. Dispose of empty containers according to federal, state and local requirements. Do not use for any other applications other than specified. Do not remove label. Read Material Safety Data Sheet for additional safety and health hazard information prior to use.

*First Aid +
Instructions in Case of Contact or Exposure Skin & Eye Contact:
Eyes: Flush with water for 15 minutes. If irritation persists consult physician.
Skin: Flood with water. If irritation develops, call physician. Inhalation: N/A
Ingestion: Drink copious amounts of water. Seek medical attention.

Spill or Leak Procedures
Local or federal regulations for your area. Steps to be taken if material is released or spilled: wear proper protective equipment while doing cleanup. Large spill: Dike and contain for intended use. Small spill: absorb on oil dry and place in approved container for disposal.

Container Handling/Storage
Keep container closed when not in use. Store in containers with Viton seals or silicon sealant gaskets.

Notice
This product has been classified in accordance with the hazard criteria of the CFR.

Disclaimer
The information herein is given in good faith, but no warranty, either expressed or implied is made. Final determination of the suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein we cannot be sure or guarantee these are the only hazards which exist.

Customer Service
Factory personnel are available for assistance at 800-313-8505 and will send you additional information on products as necessary.