PAL

Non-Hazardous Evaporative Cleaning Agent

Description and Use
PAL truck wash is a brushless through the pressure washer soap that is a truly effective for painted surfaces and polished aluminum surfaces. PALs’ principal values are its ability to leave a shining surface behind and its high dilution rates while maintaining its effectiveness. PAL is a very easily rinsed soap with the ability to leave the surface so clean that it will bead water without waxing. PAL uses no petroleum solvents to achieve its cleaning and is completely biodegradable and safe for all painted surfaces.

Advantages
*Safe on Polished Aluminum.
* Leaves shiny surface at high dilutions.
*Completely biodegradable.
* Safe for all painted surfaces.

Limitations
*Product effectiveness limited if frozen.

Technical Data
Appearance & Odor: Amber color and mild citrus odor
Physical State: Liquid
pH: 7.0
Vapor Pressure (mmHg): As Water
Vapor Density (air=1): As Water
Boiling Point: 212° F
Freezing/Melting Point: N.A
Specific Gravity (WATER =1): 1.050
Evaporation Rate: As Water
Solubility in Water: Complete

Surface & Air Temperatures
Best cleaning results are obtained when air is above 40° Fahrenheit.

Pre-Testing
Always test prior to beginning full-scale cleaning operations. Testing should confirm cleaning effectiveness.

Dilutions
5:1 to 50:1 or (8oz. to 2.5oz per gallon) for brushless vehicle cleaning with a pressure washer rinse. 100:1 or (1 oz per gallon) for brushing and new car cleanup. 30:1 or (4oz per gallon) for regular yearly house washing. 4:1 or (25 oz per gallon) for gutter cleaning or whitewalls.

Application Instructions
The PAL truckwash system is extremely versatile in the ways it may be applied. Low or high pressure work as well as through a foaming arch. High pressure application will give faster performance and generally higher dilutions. This is boosted even higher with the use of heat, though the product will work fine cold. The water softeners are built in and are to be used to the greatest advantage if premixed at high dilutions before application. High pressure rinse is recommended with the PAL because of the water saving characteristics of this method. Two applications of the soap without rinsing between is the best method to achieve brushless washing.

Safety Information
Precautionary Measures: Always wear goggles and rubber gloves when handling this product. Keep off of skin and clothing. If material comes in contact with clothing, wash before reuse. Contains Trithhanolamine and d-limonene. Do not get in eyes, on skin or clothing. Avoid breathing fumes. Keep container closed when not in use. Use with adequate ventilation. Applicators should wear rain suit of plastic, rubber or PVC, boots and gloves, face shields and goggles to avoid splash to bare skin. Dispose of empty containers according to federal, state and local requirements. Do not use for any other applications other than specified. Do not remove label. Read Material Safety Data Sheet for additional safety and health hazard information prior to use.

First Aid - Instructions In Case Of Contact or Exposure Skin & Eye Contact:
Eyes: Flush thoroughly with water for 15 minutes. If irritation persists, seek medical attention.
Skin: Wash off with water. Re-oil skin. If irritation persists, seek medical attention.
Inhalation: Remove to fresh air.
Ingestion: Do not induce vomiting. Drink copious amounts of water. Seek medical attention.

Spill or Leak Procedures
Waste Disposal Method-Check state, local or federal regulations for your area. Steps to be taken if material is released or spilled: wear proper protective equipment while doing cleanup. Large spill: Dike and contain for intended use. Small spill: absorb on oil dry and place in approved container for disposal.

Container Handling/Storage
Keep container closed when not in use. Store in containers with Viton seals or silicon sealant gaskets.

Notice
This product has been classified in accordance with the hazard criteria of the CFR.

Disclaimer
The information herein is given in good faith, but no warranty, either expressed or implied is made. Final determination of the suitability of any material is the sole responsibility of the user. All materials may present unknown hazards and should be used with caution. Although certain hazards are described herein we cannot be sure or guarantee these are the only hazards which exist.

Customer Service
Factory personnel are available for assistance at 800-313-8505 and will send you additional information on products as necessary.