[an error occurred while processing this directive]

SPECIALTY PRODUCTS

Smokemelt

C-Tar Melt

Burn Restore

This is a highly alkaline cleaning product that will remove heavy soil deposits from metal, wood or masonry at high dilutions. Great care must be taken when applying this product because of its highly active penetrating nature. Smoke melt will strip latex and enamel paints in a short time. Smoke melt is good at softening the heavy black smoke from fire damage that occurs on masonry.

Smokemelt Specifications
Smokemelt MSDS*

Smoke Stains

View Example

C-Tar Melt is a blend of water rinseable non hazardous ingredients that give exceptionally powerful penetration and softening action. This product is not dilutable with water, in fact, it’s action will be stopped with the application of water. It is biodegradable and will on it’s own aid in the separation of the tar residue from the rinse water if you contain and store the runoff for a short period of time. The ingredients do not harm the skin though they will dry it out if left constantly exposed to the tar remover. C-Tar Melt is safe for wood, metal, and masonry surfaces and will not raise the grain or cause discoloration of the surface on it own.

C-Tar Specifications
C-Tar MSDS*

View Example

This is a completely safe and easy to use repair system for covering the white burn or shiny damage done to the surface of smooth glazed brick by different acids. Simply roll, brush or spray the product on undiluted wherever the damage was done and allow the product to dry on the surface. This product can be removed with a hot pressure washer easily. Burn Restore does not work for porous brick.

Burn Restore Specifications
Burn Restore MSDS*

A.R.T.

Plexiclean

SafeRestore

A.R.T.’s unique chemistry is a solvent based resin system designed for treating the surface of anodized aluminum to renew the satin luster that has been damaged by environmental or chemical pollutants. A.R.T. stays on the surface for extended periods yet will not crack lift or peel and is easily removed for retreatment. This easy to use product is nonhazardous and nonflammable.

ART Specifications
ART MSDS*

View Example

Calcite Presoak

This product is designed as a pre-soak softener to facilitate quick removal of heavy calcite deposits on block, brick or concrete. It must be followed by NMD 80 or Ef-Fortless.

Calcite Presoak Specifications
Calcite Presoak MSDS

This product is made to safely clean plexiglass and remove graffiti. The product will not smoke or craze it. It is excellent for bus windows or phone booths. Use Plexiclean straight and apply with either a low pressure sprayer unit or wipe it on with a cloth. Often just a wipe with a damp cloth is all that is necessary to remove the paint or ink. As with all strippers, proper testing of the material on the area to be cleaned is the only way to determine the correct procedure. Product works best at room temperature range 60 degrees to 80 degrees F. Sometimes two applications are needed. Wet on wet with a short soak period prior to removal.

Plexiclean Specifications
Plexiclean MSDS*

Pav-R Clean

Pav-R Clean is an acid based cleaner that will safely remove light calcite deposits and efflorescence. This product will work on pavers, retaining walls, and decorative colored block. The cause of the problem on the surface should be identified to prevent reoccurrence where possible.

Pav-R Clean Specifications
Pav-R Clean MSDS

View Example

SafeRestore is a breakthrough product in the restoration industry. Capable of removing the deepest biological and pollution stains from limestone and brick, it is safely used to restore glass and anodized aluminum. This product can remove virtually any metal oxide stain including copper stains and can be an effective coating and efflorescence remover. Safe for most surfaces and people, with low odor during use, SafeRestore is a great choice for cleaning and restoring public buildings. Colleges, schools, hospitals, government facilities, and offices have had SafeRestore specified and successfully used for restoration and maintenance.

SafeRestore Specifications
SafeRestore MSDS*

View Example

View Example

Rinse View Example

*Adobe Acrobat Reader is required to view these pages.

Product Categories
Acids
Concrete Cleaners
Degreasers
House and Deck Cleaners
Limestone Cleaner & Marble
New Masonry Detergents
Paint Strippers
Restoration Detergents
Specialty Products
Truck Washing Soaps
Windows & Wall Cleaning

Learning Centers
Aluminum Cleaning
Limestone Restoration
Modern Surfaces
New Construction
Paint Stripping
Restoration
Slurry Dyed Block
Terra-Cotta
Truck Washing

Services
Contact EaCo Chem
Products By Application
Request Literature

EaCo Chem Info
About EaCo Chem Inc
News
< Return Home