|
|
 |
 |
 |
 |
 |
 |
 |
|
|
Paint Stripping
InStrip is a safe, easy-to-use, fast interior paint stripper that works on your toughest paint stripping projects. InStrip removes multiple paint layers and will go through primers, solvents and water-based paints. InStrip is pH: Neutral. Product removes various wood finishes, such as varnish, shellac and stains. InStrip works great on both horizontal and vertical surfaces. InStrip is readily biodegradable, non-toxic, low odor, non-corrosive, and has a low VOC. Product is safe to both the environment and applicator.
Stripper Cream : MSDS : Specification LCS : MSDS : Specification LCS is a liquid water based D-limonene and caustic paint stripper with a wide range of applications. This stripper is used for sealer, stain, and limited layer paint removal for decks, masonry, and concrete. LCS can be used to remove some latexes, enamels, resin coatings, mineral pigment and oil based stains. Because this is a caustic product always test, before using the product, for safety to the surface. Another benefit of LCS is its quick penetration on already wet surfaces to touch up graffiti and deck stripping jobs. Stripsol: MSDS : Specification A solvent based sealer, stain, coating and paint stripper with a wide range of applications that ships non-hazardous and does not burn skin. It is virtually instantaneous in penetrating most acrylics and elastomerics. Stripsol will remove multiple layers of acrylics, deck sealers, polymer coatings, latexes, acrylic latexes, alkyds, enamels, oil-based stains, polyurethanes and other resin coatings. It is not classified as flammable, has low odor and will replace methylene chloride in many applications. It does not harm aluminum, wood, masonry or sidings when used properly. Graf-Ex: MSDS : Specification GRAF-EX is a special purpose stripper designed to be used in those environments where safety and low odor, and performance are of equal importance such as schools and building interiors. It ships non-corrosive, and is pleasant and easy to use, while it strips a wide variety of materials. GRAF-EX is in fact an outstanding performer in the removal of inks and paints from painted surfaces. This is accomplished while the product remains biodegradable. This product is caustic free. GRAF-EX does not harm most substrates. It will not raise the grain of wood, cause flash rusting in metal or damage masonry surfaces. Water rinse can be used to stop its penetration. SafeRestore : MSDS : Specification SafeRestore is a breakthrough product in the restoration industry. Capable of removing the deepest pollution stains from limestone and brick, it is safely used to restore glass and anodized aluminum. This product can remove virtually any metal oxide stain including copper stains and can be an effective coating and efflorescence remover. Safe for most surfaces and people, with low odor during use, SafeRestore is a great choice for cleaning and restoring public buildings. Colleges, schools, hospitals, government facilities, and offices have had SafeRestore specified and successfully used for restoration and maintenance. PlexiClean : MSDS : Specification PlexiClean is made to safely clean plexiglass and remove graffiti. This product will not smoke or craze and is excellent for both bus windows and phone booths. Often just a wipe with a damp cloth will remove most paint and ink.
NMD80 is a detergent-based solution designed for safe clean-up of new masonry structures. The detergent allows fewer applications and can be used comfortably around people. When used as directed, there should be no impact on soils near the site. Recommended dilutions start at 4:1. For sandface brick: Apply the product from the bottom up using either a low-pressure sprayer on a high volume downstream capable of 4:1. Repeat before rinsing with low pressure from the top down to prevent drying. For S-Type Mortar: Apply NMD80 using a 3:1 dilution. Repeat application at least twice before rinsing. Block Ground face, burnished or any block, including integrally waterproofed colored masonry units, can be cleaned effectively with NMD80 at a 4:1 dilution. Follow with a pressure washer rinse. Concrete Tilt-up: On the job site, NMD80 can be used to clean tilt-up concrete very effectively. The dilution range will vary according to the desired surface finish and should be between 15:1 to 30:1. If the goal is to etch the tilt-up at the plant, a stronger concentration should be used, although the actual dilution rate will be determined by the desired degree of etch. A high volume downstream nozzle capable of 4:1 may be appropriate for application. Follow with an application of NMD80 which will ensure an even, finished appearance without streaks. Very tall structures should be cleaned one entire section at a time, working from the top down. Splatter from masonry: Repeated applications of NMD 80 will remove splatter from masonry. Using a masonry stone or scraper in between will speed the process. Precast Stone See "Concrete".
Glazed Surface Restoration (GSR) or straight SafeRestore will remove paint wash from brick. Apply the GSR straight to 10:1 dilution with a low pressure sprayer. Rinse with a high pressure wash or a garden hose. Multilayer Stripping Stripper Cream is effective for removing multiple layers of paint. It can be sprayed, rolled or brushed with equal ease. The product will not dry out. When applied straight, a skin will form allowing the paint to be scraped off mostly intact or it can be removed with a high pressure wash. Acrylic/Urethane Stripping Stripsol is used undiluted. Call for application procedures. Latex Stripping LCS or Stripper Cream can be used for stripping latex paint. Apply straight to 5:1. LCS can be sprayed on then rinsed with a pressure wash. Coating Removal Both SafeRestore and Graf-Ex remove coatings and sealers quickly without causing environmental harm. The categories insist of (1) Anti-graffiti coatings, complex acrylic (2) Silane/Siloxane water-proofers; water and solvent based (3) Acrylic water-proofers; water and solvent based.* Stripsol provides a solution for the removal of urethane coatings and other acrylic-based polymer solutions. |