| TRUCK
WASHING LEARNING CENTER |
|
|
CATEGORIES:
BRUSHLESS CLEANING
- POLISHED ALUMINUM - ALUMINUM
BRIGHTENERS - RECLAIM SOAP
- DEGREASING - CONCENTRATE
VS. POWDERS
POLISHED ALUMINUM
During
Sabre application
Cleaned
with Sabre |
Sabre
is a very effective biodegradable non hydrofluoric acid general
purpose cleaner. The main is to safely clean aluminum and stainless
steel truck bodies without the dangerous acids and their harmful
side effects. It is absolutely safe around glass and can be
allowed to dry on the surface. This product is safe for polished
aluminum, but is recommended that the concentrate be cut in
half before using it to maintain the shine on truck bodies or
polished tanks. SABRE is great in a two step situation with
Dazzle and this combination leaves a very nice shine on the
surface. It is also an excellent cleaner on fiberglass, tile,
porcelain and the metal finishes commonly found in wash areas.
|
This
safe concentrate of acids and detergents is just the thing to clean
the walls of the scum that builds up in these areas. This product
generally will remove many kinds of mineral and metal stains or buildups
including brake dust from wheels.
Before
Sabre Application |
DIRECTIONS:
This product is best applied through a pressure washer, either
by low or high pressure. Apply the product to the surface twice
with a minimum of 1 minute dwell time in between, allow to soak
for several minutes, and then rinse with high pressure. Exceptionally
dirty surfaces that have not been washed for a long period of
time may require scrubbing with a brush. This is also an acceptable
application means. There is no need to worry |
about
this product on the paint or glass of a vehicle, as it will not harm
them. It is always recommended though, not to let soaps dry on the
surface. Refer to M.S.D.S. for proper safety instructions, but rubber
gloves and safety glasses are always recommended.
DILUTIONS:
1:1 to 20:1 low pressure application depending on the severity
of the buildup, 15:1 to 30:1 high pressure application.
For polished aluminum trucks cut Sabre (ready to use) 1:1 and
then use the above dilutions for brushless washing.
RIGHT TO KNOW INGREDIENTS:
Hydrochloric Acid 7047-01-0
FIRST AID:
Always wear proper eye and skin protection with this product.
For prolonged eye contact, rinse thoroughly with cool clean
water and if irritation persists, seek immediate medical attention.
|
After
Sabre Applications |
|
©
Copyright 2002 by EaCo Chem
|
 |
|
Product Categories