| MODERN
SURFACES LEARNING CENTER |
|
|
CATEGORIES:
ANODIZED ALUMINUM
- GLASS - SIDEWALKS
- CONCRETE - COATED
PANELS - PAINT - EIFS
GLASS
Hard Water Stain Removal |
Glass
that has not been previously destroyed by competitors restoration
products is now easily and safely restored. There are no hazardous
fluorides in SafeRestore to attack the glass or you. Spray on
the product and pressure rinse off. Virtually every type of
glass marking can be removed with just one product: Hard water
stains, lime run from masonry, concrete leachate sealer over
spray, paint wash, and pollution streaks. In fact everything
but etch from competitors restoration products is quickly removed
by SafeRestore Any of the lime based stains (hard water, |
concrete
leaching) can be removed usually with a single application without
any scrubbing involved. Typical strip washer, bucket and squeegee
rinsing though will not be adequate for SafeRestore, as there are
a tremendous concentration of soaps in this formulas. A garden hose
may not be adequate but will increase the time spent on the job considerably
unless a more dilute solution of SafeRestore has been used. Some dilution
has worked in several applications but that must be determined by
testing. Lime Run and Paint Chalk may need a double soap application
and for paint chalk some agitation may be needed. Sealer over spray
removal will definitely require double soap and agitation with a cloth
or brush and pressure washer rinse. Beading is a sign all the sealer
has not been removed. All the above applications require no special
protection to the surrounding area but you should not let the undiluted
product run over areas below as cleaning will occur that will make
the surface appearance irregular and cause the customer concern. In
tens of thousands of tests SafeRestore has never marked solid undamaged
glass. Given that it removes sealers it will reveal hidden damage
caused by previous failed attempts at restoration that have been covered
up.
| We
do not have sufficient data at this time to be able to say unequivocally
that SafeRestore is safe on glass treatments or films.
Much
glass with these applied has been cleaned without any problems
in coast to coast testing but our professional window washers
working with this product tend to be secretive about their jobs
and so our data, at this point, is not as complete as we would
like. Always test before bidding and test in several spots.
Often times you will be taken to a specific area of "worst
nightmare" conditions to test and damage will have been
done by competitor products already. So we recommend testing
outside and inside the designated area. SafeRestore used responsibly
will not create any problems for you. |
|
SafeRestore is 100% guaranteed
safe on glass. It will remove atmospheric staining, concrete leachate,
silicate soap stains, paint wash stains and many sealers safely, quickly
and easily. Generally one application of undiluted SafeRestore
misted or brushed on the glass, wiped and then rinsed will remove
these stains.
To
obtain further information about this topic or others CLICK
HERE to fill out a feedback form or you can call us toll free
at 1-800-313-8505.
|
©
Copyright 2002 by EaCo Chem
|
 |
|
Product Categories