EaCo Chem - New Construction Products

EC Jet

Downstream Chemical Injector for NMD 80 and SOS-50



The EC Jet is a quick coupling attachment to the end of your pressure washer designed to dilute material 4:1 (4 parts water to 1 part chemical). It is primarily used when applying NMD 80 or SOS 50 for new construction clean-up. The EC Jet allows for quick and accurate dilutions while spraying the chemical with the proper nozzle already in place. The open/close valve can also be used to shut off the chemical in-take and allow for rinsing without removing the unit. For best results, a 3 to 5 gallon per minute pressure washer not exceeding 2,000 P.S.I. is recommended.

 


 


* A MEG type tip is required for the EC Jet to attach to the tip of the pressure washer wand. If the wand has a NPT tip, an additional attachment will be required


NMD 80

NMD80

NMD 80 is a buffered detergent-based solution designed for removing mortar smears and efflorescence from new masonry structures. NMD 80 can be used on virtually any type of brick, block, stone, cast stone, pre-cast and glass.
new construction cleaning
EF-Fortless Efflorescence Remover

SOS-50

SOS-50 is a buffered organic salt and detergent-based solution designed for removing mortar smears and efflorescence from new masonry structures. SOS-50 can be used on most masonry substrates.

footer

Copyright EaCo Chem Inc. All rights reserved.
Member of the NPCA    Member of the Cast Stone Institute    Member of the Pennsylvania Concrete Masonry Association    Member of the Mid-Atlantic Masonry Association (MAMA)

Facebook  Twitter  Google+  Youtube